DRV8833EVM

Запросить




DRV8833EVM характеристики

EVAL MOD, POWER MANAGEMENT MOTOR CONTROL.



The DRV8833EVM is an evaluation module to demonstrates the capabilities and performance of the DRV8833 integrated circuit. The DRV8833 is a low voltage, 2A stepper or single/dual brushed DC motor driver. It can also be used to drive solenoids or relays. The device has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. The output driver block of each H-bridge consists of N-channel power MOSFET's configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. With proper PCB design, each H-bridge of the DRV8833 is capable of driving up to 1.5A RMS (or DC) continuously, at 25°C with a VM supply of 5V. It can support peak currents of up to 2A per bridge. Current capability is reduced slightly at lower VM voltages. Internal shutdown functions with a fault output pin are provided for over current protection, short circuit protection.

подробнее

Производитель Чипа Texas Instruments
Ничего не выбрано
Номер Ядра Чипа DRV8833
Тип Приложения Набора Управление Питанием - Контроль Двигателя
Подтип Приложения DC Двигатель со Щетками
Содержимое Комплекта Eval Board DRV8833
Линия Продукции -
SVHC (Особо Опасные Вещества) No SVHC (15-Jun-2015)
Особенности PWM Control Interface, Onchip Current Regulation Limits Inrush Currents, Low Power Sleep Mode

Техническое описание

Вы можете купить DRV8833EVM от 1 штуки. Работаем с частными лицами и с юридическими лицами по безналичному расчету.

Цену DRV8833EVM и наличие сообщим по вашему запросу.



Сопутствующие товары
MOTOR, DVR, DUAL, H-BRDG, 16QFN
от 237.80 ₽
+891.75 на ваш счёт
Логический элемент ИЛИ-НЕ, 4 элемента, 2 входа, 8мА, 4.75В до 5.25В, DIP-14
от 68.47 ₽
+51352.5 на ваш счёт
Измерительный усилитель, 1 Усилитель, 25 мкВ, 0.16 В/мкс, 150 кГц, ± 900мВ до ± 2.75В, VSSOP
от 965.52 ₽
+14482.8 на ваш счёт