PMOD DHB1

Запросить




PMOD DHB1 характеристики

DEMO BOARD, H-BRIDGE MOTOR DRIVER.



The PMOD DHB1 is a H-Bridge Motor Driver based on DRV8833 dual H-Bridge motor driver chip to drive two DC motors or one stepper motor. The DHB1 is controlled through the Pmod connector J1. Logical levels on ENx and DIRx determine the motor direction and speed of the attached motors. The DHB1 uses a demultiplexer and pull-down resistors on the inputs to the DRV8833 H-Bridge pins to ensure that the H-Bridge works in fast decay mode. The intended operation of the DHB1 uses the enable pin as the PWM input and the direction pin as a logic level selector to set the direction of the motor rotation. Table 1 lists the motor responses that result from various input combinations. The DRV8833 chip provides over-current protection on the motor drive circuits. Each internal drive FET is independently monitored for an over-current condition and will be shut down internally to protect the chip.

подробнее

Производитель Чипа Texas Instruments
Ничего не выбрано
Номер Ядра Чипа DRV8833
Тип Приложения Набора Управление Питанием - Контроль Двигателя
Подтип Приложения Полумостовой Драйвер
Содержимое Комплекта Demo Board DRV8833, 6inch 12pin Cable, 6inch 2 x 6pin Cable, 1 x 12pin & 2 x 6pin Headers
Линия Продукции -
SVHC (Особо Опасные Вещества) No SVHC (17-Dec-2015)
Особенности 2 Half Bridge Interfaces of 1.5A, 2.5V-5V Operation, 2 Ch Quadrature Encoder for Hall-effect Sensors

Вы можете купить PMOD DHB1 от 1 штуки. Работаем с частными лицами и с юридическими лицами по безналичному расчету.

Цену PMOD DHB1 и наличие сообщим по вашему запросу.