507

Запросить




507 характеристики

CONTROLLER, DC MOTOR, 6A.



The 507 is a compact DC Motor Control features minimum footprint design ideal for speed or torque control of permanent magnet or shunt wound DC motors from single phase supplies. Control of the associated DC motor is achieved by using a linear closed loop feedback signal based on the motor's own DC armature voltage. This enables constant motor speed to be maintained throughout variable motor loads. Improved speed measurement can be obtained by using a tacho-generator, connected to the motor's shaft, to provide the feedback signal. A current loop within the speed feedback path ensures that safe current levels are always provided to the armature of the motor up to the level set by the maximum current potentiometer. This adjustment is linear and switchable to a lower range of half the controller current. If the controlled motor is stalled, then a stall timer will remove current from the motor after approximately 15 seconds.

подробнее

Линия Продукции -
Ничего не выбрано
SVHC (Особо Опасные Вещества) No SVHC (15-Jun-2015)
Для Использования с DC двигателем с постоянным магнитом или шунтовой обмоткой
Тип Монтажа DIN-рейка
Внешняя Ширина 96 мм
Внешняя Глубина 66 мм
Внешняя Длина / Высота 125 мм
Максимальный Выходной Ток 6 А
Рейтинг IP / NEMA IP20
Минимальное Входное Напряжение 110 В AC
Максимальное Входное Напряжение 240 В AC
Диапазон Напряжения Питания 110В до 120В, 220В до 240В
Максимальное Напряжение Питания 120В DC
Минимальное Напряжение Питания 110В DC
Максимальное Выходное Напряжение 180 В
Минимальное Выходное Напряжение 90 В DC
Максимальная Частота Питания 65 Гц
Минимальная Частота Питания 45 Гц
Максимальный Ток в Обмотке Ротора
Максимальное Напряжение в Обмотке Ротора 180В DC

Вы можете купить 507 от 1 штуки. Работаем с частными лицами и с юридическими лицами по безналичному расчету.

Цену 507 и наличие сообщим по вашему запросу.